is it possible to run mairlist with nil GUI, in the command line ?
the broadcast radio station i work at, uses analogue audio level metering - VU meter, on a panel.
i would like to automate the process of reading and testing audio levels in software.
to do this in software, i need mairlist to play a playlist.mlp file with nil graphical user interface.
mAirList can not run without a GUI but it is possible to remote control it via the REST Interface, if you have the professional Edition.
I’m actualyl not sure what you intend to do and why you can’t have a GUI.
why you can’t have a GUI.
i run software which measures audio levels to broadcast standard ITU-R BS.1770.
i adjust the audio level in mairlist to match that level which is required for the VU panel, using the BS.1770 reading.
i want to automate this process.
[quote=“feroz, post:3, topic:11177”]i run software which measures audio levels to broadcast standard ITU-R BS.1770.
i adjust the audio level in mairlist to match that level which is required for the VU panel, using the BS.1770 reading.
i want to automate this process.[/quote]
That should be possible, to automate this process but mAirlist will still show it’s GUI, even if it is no used.